MODEL:
NCS3-R313-SI
#8183
Drawings: G.A. & specs
Standard
Drawings: G.A. & specs
Long Version
Deck model file name and no.
NCS-01 / NCS-06
Drive – hydraulic motors
1 x SI GM2 -300
Core pull at max pressure (210 bar):
3,0 ton
Recommended oil supply
flow range for motors:
60 – 70 l/min
flow range for cylinders:
38 – 48 l/min
pressure motors:
165 bar
pressure cylinders:
180 bar
power requirement – motors
20 – 24 kW
power requirement – cylinders
14 – 18 kW
Performance at above supply:
speed – core Ø 42 – 49 m/min
– midnet Ø 58 – 68 m/min
pull – core Ø 2.3 ton
– midnet Ø 1.7 ton
Performance calculations:
flow per sheave rev. 1.4 l/rev
torque per bar 21.8 Nm/bar
Sheave Ø − core / midnet /outside Ø
313 / 430 / 840 mm
Sheave type
Roller
Hydraulic movements:
Stacking radius Standard:
1.1m to 7.7m
Stacking radius Long vers:
Slew:
360°
Sheave head wrist:
270°
Standard arm length:
Vertical:
4.5 m
Horizontal:
2.75
Slew torque – max:
11.1 ton metres
Weights:
NCS / head :
3300 / 720 kg
Pedestal (min height 1.4m)
180 kg+170kg/m
Winch pack:
150 kg
Features & options
Stainless Steel net contact area:
Standard
Stainless Steel Pins for Ø less than 50mm:
Standard
Stainless Steel Bolts where smaller than M12:

Cylinder rods EN8, double chrome:
Standard
Split sheaves:
N/A
Staffa hydraulic motor:
N/A
Sai hydraulic motor:
Standard
Long arm
– lower / upper boom*:
5.5 / 2.75 m*
- min / max radius* :
0.7 / 8.6 m*
Pedestal Height – 1,4 to 5m:
As Required
Winch –at max extended:
2.5 ton at 8.7 m